注册
登录
| 关键词： nbsp 地址 addr arp address 物理 Physical inet specified interface |
arp.exe 是一个管理网卡底层物理地址的程序，每个网卡都有一个全球唯一的物理地址，上网时，动态的IP地址就是根据这个物理地址影射的。在同一个局域网段内有两个物理地址相同的网络适配器，不论如何配置都会造成IP地址冲突。arp -a,显示arp的影射；arp -s IP地址 物理地址，增加一个arp影射，如arp -s 192.168.1.1 00-aa-00-00-c2-99；arp -d IP地址 物理地址，del掉一个arp影射。用法：当IP地址冲突时，使用此命令可以把冲突的IP地址屏蔽掉！详细用法：Displays and modifies the IP-to-Physical address translation tables used byaddress resolution protocol (ARP).ARP -s inet_addr eth_addr [if_addr]ARP -d inet_addr [if_addr]ARP -a [inet_addr] [-N if_addr] -a Displays current ARP entries by interrogating the current protocol data. If inet_addr is specified, the IP and Physical addresses for only the specified computer are displayed. If more than one network interface uses ARP, entries for each ARP table are displayed. -g Same as -a. inet_addr Specifies an internet address. -N if_addr Displays the ARP entries for the network interface specified by if_addr. -d Deletes the host specified by inet_addr. -s Adds the host and associates the Internet address inet_addr with the Physical address eth_addr. The Physical address is given as 6 hexadecimal bytes separated by hyphens. The entry is permanent. eth_addr Specifies a physical address. if_addr If present, this specifies the Internet address of the interface whose address translation table should be modified. If not present, the first applicable interface will be used.Example: > arp -s 157.55.85.212 00-aa-00-62-c6-09 .... Adds a static entry. > arp -a .... Displays the arp table. |
|
声明：文章版权归原作者所有 部分文章转自互联网 如有侵权请联系
[邮箱地址] 删除
|
