基于固定IP的ADSL配置实例

2005-8-8 02:43 1017 0

摘要: bridge irb ! !-------启用集成路由桥接模式 ! interface Ethernet0 ip address 192.168.0....

关键词： nbsp bridge interface 接口配置 ip 0.0 address 192.168 nat

bridge irb ! !-------启用集成路由桥接模式 ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip nat inside ff0099> !-------配置内网接口 ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/35 encapsulation aal5snap ! bundle-enable dsl operating-mode auto bridge-group 1 ! !--------配置ATM接口，把ATM0接口归属于bridge-group 1 ! interface BVI1 ip address 171.68.1.1 255.255.255.240 ip nat outside !---------配置虚拟桥接组1做为NAT的外部接口 ! ip nat inside source list 1 interface BVI1 overload ip nat inside source static tcp 192.168.0.5 80 171.68.1.1 80 extendable ip classless ip route 0.0.0.0 0.0.0.0 171.68.1.254 access-list 1 permit 192.168.0.0 0.0.0.255 bridge 1 protocol ieee bridge 1 route ip !!---------配置桥接协议和IP协议

声明：文章版权归原作者所有部分文章转自互联网如有侵权请联系 [邮箱地址] 删除