注册
登录
| 关键词： nbsp VolGroup00 locallhost aaalvm Volume LogVol group VolGroup root dev |
周末朋友的服务器硬盘出问题了，让IDC的人挂了个IDE硬盘把系统安装好，然后再挂上以前的SATA硬盘，想把数据倒腾出来，结果哥们发现他搞不定，给我打电话求助。我远程上去看了下，发现2块盘系统做的都是LVM分区格式8e，不是ext3的83，难怪他不会挂载，而且还有个问题就是卷组都是默认安装的同一个名字VolGroup00。 [root@locallhost ~]# pvs PV VG Fmt Attr PSize PFree /dev/hda2 VolGroup00 lvm2 a- 74.41G 0 /dev/sda2 VolGroup00 lvm2 a- 232.78G 0 hda2是新系统盘74G多，sda2是老数据盘232G多。卷组名称一样，因为2个系统安装的时候都是默认安装的。 [root@locallhost ~]# vgs VG #PV #LV #SN Attr VSize VFree VolGroup00 1 2 0 wz--n- 232.78G 0 VolGroup00 1 2 0 wz--n- 74.41G 0 我们先用vgrename改卷组名： [root@locallhost ~]# vgrename VolGroup00 aaalvm Found more than one VG called VolGroup00. Please supply VG uuid. 直接报有同名，需要用uuid。查uuid可以用vgdisplay或vgs -v： [root@locallhost ~]# vgdisplay --- Volume group --- VG Name VolGroup00 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 232.78 GB PE Size 32.00 MB Total PE 7449 Alloc PE / Size 7449 / 232.78 GB Free PE / Size 0 / 0 VG UUID bAydq6-rv9e-wCa0-iK2f-zFWn-UBUr-4AR3Ct --- Volume group --- VG Name VolGroup00 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 74.41 GB PE Size 32.00 MB Total PE 2381 Alloc PE / Size 2381 / 74.41 GB Free PE / Size 0 / 0 VG UUID YHLmkq-b1xS-UzAS-Y3nv-6vaX-2Xou-GScvk0 [root@locallhost ~]# vgs -v Finding all volume groups Finding volume group "VolGroup00" Archiving volume group "VolGroup00" metadata (seqno 3). Archiving volume group "VolGroup00" metadata (seqno 3). Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 3). Finding volume group "VolGroup00" Archiving volume group "VolGroup00" metadata (seqno 3). Archiving volume group "VolGroup00" metadata (seqno 3). Creating volume group backup "/etc/lvm/backup/VolGroup00" (seqno 3). VG Attr Ext #PV #LV #SN VSize VFree VG UUID VolGroup00 wz--n- 32.00M 1 2 0 232.78G 0 bAydq6-rv9e-wCa0-iK2f-zFWn-UBUr-4AR3Ct VolGroup00 wz--n- 32.00M 1 2 0 74.41G 0 YHLmkq-b1xS-UzAS-Y3nv-6vaX-2Xou-GScvk0 查到数据盘的uuid是bAydq6-rv9e-wCa0-iK2f-zFWn-UBUr-4AR3Ct，改卷组名的时候用uuid，如下： [root@locallhost ~]# vgrename bAydq6-rv9e-wCa0-iK2f-zFWn-UBUr-4AR3Ct aaalvm Volume group "VolGroup00" successfully renamed to "aaalvm" ok了，改完再vgs看下： [root@locallhost ~]# vgs VG #PV #LV #SN Attr VSize VFree VolGroup00 1 2 0 wz--n- 74.41G 0 aaalvm 1 2 0 wz--n- 232.78G 0 没问题了，再lvscan下： [root@locallhost ~]# lvscan inactive '/dev/aaalvm/LogVol00' [228.84 GB] inherit inactive '/dev/aaalvm/LogVol01' [3.94 GB] inherit ACTIVE '/dev/VolGroup00/LogVol00' [70.47 GB] inherit ACTIVE '/dev/VolGroup00/LogVol01' [3.94 GB] inherit 已经看到新改名的卷组是inactive了，2个分区LogVol00和LogVol01，用vgchange加载我们该名过的aaalvm卷组： [root@locallhost ~]# vgchange -ay /dev/aaalvm 2 logical volume(s) in volume group "aaalvm" now active 提示active状态成功，最后mount文件系统： [root@locallhost ~]# ls /dev/aaalvm/ LogVol00 LogVol01 [root@locallhost ~]# mount /dev/aaalvm/LogVol00 /aaaa/ [root@locallhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 69G 2.7G 63G 5% / /dev/hda1 99M 12M 82M 13% /boot tmpfs 1010M 0 1010M 0% /dev/shm /dev/mapper/aaalvm-LogVol00 222G 111G 100G 53% /aaaa [root@locallhost ~]# mount /dev/aaalvm/LogVol01 /bbb/ /dev/aaalvm/LogVol01 looks like swapspace - not mounted mount: you must specify the filesystem type LogVol01是swap分区，不用挂载。把/bin/mount /dev/aaalvm/LogVol00 /aaaa/写入rc.local里面，让每次开机自动挂载，也可以写到fstab里面，但是如果写错出问题可能导致进不了系统，所以建议写rc.local。 |
|
声明：文章版权归原作者所有 部分文章转自互联网 如有侵权请联系
[邮箱地址] 删除
|
