ubuntu下minicom,fastboot安装

2012-4-23 11:07 666 0

摘要: 一、minicom的安装 1.用sudo apt-get install minicom安装 ...

关键词： nbsp ATTR idProduct idVendor SUBSYSTEM protocol fastboot OWNER MODE 0600

一、minicom的安装 1.用sudo apt-get install minicom安装 2.设置用sudo minicom -s进入设置界面，选择Serial port setup选项： www.2cto.com serial device :/dev/ttyUSB0 Bps/Par/Bits:115200 8N1 Hardware Flow Control: NO Software Flow Control: NO 之后退出保存。使用时敲minicom命令二、fastboot安装先下载fastboot工具，一般编译工具里自带。下面就root用户下安装讨论。建个51-android.rules文件，内容如下： # adb protocol on passion (Nexus One) SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="0002", MODE="0600", OWNER="uarmchen" www.2cto.com # fastboot protocol on passion (Nexus One) SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0fff", MODE="0600", OWNER="uarmchen" # adb protocol on crespo/crespo4g (Nexus S) SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", MODE="0600", OWNER="<uarmchen>" # fastboot protocol on crespo/crespo4g (Nexus S) SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", MODE="0600", OWNER="<uarmchen>" # adb protocol on stingray/wingray (Xoom) SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", ATTR{idProduct}=="70a9", MODE="0600", OWNER="<uarmchen>" # fastboot protocol on stingray/wingray (Xoom) SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="708c", MODE="0600", OWNER="<uarmchen>" # adb protocol on maguro/toro (Galaxy Nexus) SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", MODE="0600", OWNER="<uarmchen>" # fastboot protocol on maguro/toro (Galaxy Nexus) SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e30", MODE="0600", OWNER="<uarmchen>" # adb protocol on panda (PandaBoard) SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d101", MODE="0600", OWNER="<uarmchen>" # fastboot protocol on panda (PandaBoard) SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d022", MODE="0600", OWNER="<uarmchen>" www.2cto.com # usbboot protocol on panda (PandaBoard) SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d010", MODE="0600", OWNER="<uarmchen>" 连设备时，用lsusb命令查看idVendor和idProduct，添加一组。之后将51-android.rules文件复制到/etc/udev/rules.d/ 目录下。在～/.bashrc文件里添加fastboot工具放的位置，如export PATH=$PATH:/home/uarmchen/tools 这样不用在fastboot命令前带sudo了。摘自 zzobin的专栏

声明：文章版权归原作者所有部分文章转自互联网如有侵权请联系 [邮箱地址] 删除