注册
登录
| 关键词： nbsp Switch config VLAN Fa active default ITAT 192.168 name |
企业级中大型网络部署方案 需求：1，公司总部需要联网的节点数为150个节点2，公司总部为内网用户提供文件共享服务器和OA服务器3，公司总部能够访问internet，实现资源浏览和邮件收发4，公司有一个分支机构，实现总部与分支机构通信（大量数据频繁传输）5，公司有五个部门，按照行政机构划分VLAN，部门间可以相互通信6, 保证网络的安全7, 保证网络的可靠运行 3560A: Switch>en Switch#vlan database Switch(vlan)#vtp domain ITAT Changing VTP domain name from NULL to ITAT Switch(vlan)#vtp server Device mode already VTP SERVER. Switch(vlan)#vlan 2 name lei VLAN 2 added: Name: lei Switch(vlan)#vlan 3 name gang VLAN 3 added: Name: gang Switch(vlan)#vlan 4 name shen VLAN 4 added: Name: shen Switch(vlan)#exit APPLY completed. Exiting.... Switch#show vtp status Maximum VLANs supported locally : ITAT5 Number of existing VLANs : 8 VTP Operating Mode : Server VTP Domain Name : ITAT VTP Pruning Mode : Disabled VTP V2 Mode : Disabled VTP Traps Generation : Disabled MD5 digest : 0x87 0x2C 0xFC 0x72 0x04 0xC1 0x93 0xD7 Configuration last modified by 0.0.0.0 at 3-1-93 00:07:21 Local updater ID is 0.0.0.0 (no valid interface found) Switch#show vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Fa0/24 Gig0/1, Gig0/2 2 lei active 3 gang active 4 shen active ITAT2 fddi-default active ITAT3 token-ring-default active ITAT4 fddinet-default active ITAT5 trnet-default active VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet ITAT001 1500 - - - - - 0 0 2 enet ITAT002 1500 - - - - - 0 0 3 enet ITAT003 1500 - - - - - 0 0 4 enet ITAT004 1500 - - - - - 0 0 ITAT2 enet 10ITAT2 1500 - - - - - 0 0 ITAT3 enet 10ITAT3 1500 - - - - - 0 0 ITAT4 enet 10ITAT4 1500 - - - - - 0 0 ITAT5 enet 10ITAT5 1500 - - - - - 0 0 Switch# config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#int fa0/4 Switch(config-if)#swit Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 4 Switch(config-if)#exit Switch(config)#int fa0/3 Switch(config-if)#switchport mode trunk witch(config-if)#exit Switch(config)#ip routing Switch(config)#int vlan 2 tate to upSwitch(config-if)#ip addr 192.168.20.1 255.255.255.0 Switch(config-if)#no shut Switch(config-if)#int vlan 3 state to upSwitch(config-if)#ip addr 192.168.30.1 255.255.255.0 Switch(config-if)#no shut Switch(config-if)#exit Switch(config)#int vlan 4 state to upSwitch(config-if)#ip addr 192.168.40.1 255.255.255.0 Switch(config-if)#no shut Switch(config-if)#exit Switch(config)#int fa0/5 Switch(config-if)#no switc Switch(config-if)#no switchport Switch(config-if)#ip addr 192.168.10.1 255.255.255.0 Switch(config-if)#no shut Switch(config-if)#exit Switch(config)#ip route 0.0.0.0 0.0.0.0 192.168.10.2 Switch(config)#router rip Switch(config-router)#ver 2 Switch(config-router)#net 192.168.10.0 Switch(config-router)#net 192.168.20.0 Switch(config-router)#net 192.168.30.0 Switch(config-router)#net 192.168.40.0 2960A: Switch>en Switch#vlan database Switch(vlan)#vtp domain ITAT Domain name already set to ITAT. Switch(vlan)#vtp client Setting device to VTP CLIENT mode. Switch(vlan)#exit APPLY completed. Exiting.... Switch#show vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/4, Fa0/5 Fa0/6, Fa0/7, Fa0/8, Fa0/9 Fa0/10, Fa0/11, Fa0/12, Fa0/13 Fa0/14, Fa0/15, Fa0/16, Fa0/17 Fa0/18, Fa0/19, Fa0/20, Fa0/21 Fa0/22, Fa0/23, Fa0/24, Gig1/1 Gig1/2 2 lei active 3 gang active 4 shen active ITAT2 fddi-default active ITAT3 token-ring-default active ITAT4 fddinet-default active ITAT5 trnet-default active VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet ITAT001 1500 - - - - - 0 0 |
|
声明：文章版权归原作者所有 部分文章转自互联网 如有侵权请联系
[邮箱地址] 删除
|
