VMware下Solaris 9/10中显示设置的成功方法

2005-6-13 12:55 1361 0

摘要: 我下了南非蜘蛛装好的solaris10的vmdisk(谢谢他), 用sunwxf86-vmware.tar.gz装X...

关键词： vmware solaris10 86 800x600 sunwxf class 装好 Solaris9 name 南非

我下了南非蜘蛛装好的solaris10的vmdisk(谢谢他), 用sunwxf86-vmware.tar.gz装XFree86驱动后,kdmconfig却找不到 XF86-VMWARE,我以为solaris10不行，于是我下了Solaris9(u6),全新安装在VMware4.5下，再装sunwxf86-vmware.tar.gz，成功选到了 XF86－VMWARE，重启后顺利进入GNOME的Xwindow. 我又在Solaris10下重装sunwxf86-vmware.tar.gz,始终找不到 XF86－VMWARE，于是我试着按Solaris9的设置修改Solaris10: 1.vi /etc/openwin/server/etc/OWconfig 2.修改如下： class="XSCREEN" name="SFWxf86.vmware" ddxHandler="ddxSFWxf86.vmware.so.1" ddxInitFunc="SFWxf86Init" AdapterManufacturer="XF86-VMWARE" AdapterModel="VMware virtual video adapter"; class="XSCREENCONFIG" name="vmware" device="SFWxf86.vmware" res="800x600" defdepth="24" size="17-inch (43cm)" board="xf86/vmware.xqa" monitor="mfreq/svga.vda" dpix="58" dpiy="58" desktop="800x600" DisplayChksum="0xcd2e6ec" hz="56" MonitorManufacturer="Super VGA" MonitorModel="35.5 kHz (800x600 @ 56Hz and 1024x768 Interlaced)" dcm="Adapter"; class="XDISPLAY" name="0" coreKeyboard="IKBD" corePointer="ps22b" listOfScreens="vmware"; 　 3.重启后顺利进入GNOME!!

声明：文章版权归原作者所有部分文章转自互联网如有侵权请联系 [邮箱地址] 删除